*Enterprise accounts – refer to directions from your system administrator*
- Turn on connected devices (tablet, phone, etc.)
- Go to application store on your Android or Windows device and search “WiCollab®.” Select and install the WiCollab® app. App icon to the right.
- Once installed, open the app, and allow app access to device location, photos and media, and record audio for optimal use.
- On the home login screen, follow these prompts:
- Click on “sign up”.
- Enter tool serial number, click validate.
- Enter username.
- Enter “first name” and “last name”.
- Enter and confirm “eùail”, click sign up. An email will be sent to you to create a password.
- Sign into WiCollab® app, using your created username and password.
- Power on WiTorch®, the tool will appear on screen after ~30 seconds to a minute.
- If the tool does not appear on screen after a minute, pull down on device screen to refresh search.
- 12-digit MAC address will appear with tool, verify it matches MAC address on handle of tool
- Click WiTorch® “Connect” button and select connection type between:
- P2P: Connection is established between device and tool via tool hotspot. Limited tool and app functionality
- Wireless Network: Connection is established between device, tool, and surrounding wireless network. Full tool and app functionality
- Select network and enter password.
- Connecting to a network can take up to a minute.
- Select network and enter password.
- Once on the tool streaming screen, the tool can be controlled via the buttons on the tool or via the app buttons. See below for instructions on full button guidance.